 |
| Be Different - Sound Better |
|
| Be Different - Sound Better |
| Key Features of the Precision Port™: | |
| Flare Port Technology | |
| Greater Sound Pressure Levels | The "Precision Port™" can add an average of 3db in output if used correctly. |
| Cleaner Sound - Less Distortion | No Turbulence at Entrance or Exit of Port |
| Cosmetically Appealing | The mounting flange on the outside flare has been textured to be more appealing to the eye. |
| Adaptability | Can be used in any type of ported enclosure as long as you have left a minimum diameter of 5.25" for 2" ports, 6.25" for 3" ports, 7.25" for 4" ports, and 9.25" for 6" ports. |
| High Quality ABS Construction | In order to obtain a high quality part we utilize injection and extruded molding processes. This allows PSP to achieve closer tolerances so all parts will fit properly. |
| Easy Installation | Due to our design of the 2", 3", and 6" Precision Ports you can simply cut your port hole to the same diameter as the flared end of the inside port, drop the assembled port in and either glue or screw it down. No need to use round-over routering and back filling. On our ports that have no mounting holes you can backfill if you want but routering is not necessary since we have a flat mounting flange on the outside flare.
Currently PSP manufactures 2", 3", 4", and 6" sizes. Other sizes may be introduced at a later date. Due to the modular design we have incorporated into our product you can achieve port lengths from 4" on the 2" Precision Port and 5" on the 3", 4" , and 6" Precision Ports, flares only with 1 connecting ring, to any length you need by adding lengths of tubing and connecting rings. |
| Available in standard or no mounting hole variations. | The mounting flange on the 3" and 4" outside flare is made with or without mounting holes per your appliaction. The 2" and 6" outside flares have recessed drill bit guides on the back of the flange if you want to drill mounting holes. The 2" and 6" also have a ring on the back side of the outside flare to help secure the flare in the enclosure. |
| Designed and Made in the USA. | Precision Sound Products, Inc.
241 Illinois Route 73 N. Pearl City, IL 61062 Telephone: (815) 599-0662 Fax: (309) 279-0359 |